|In Dimension:||W1800*D2600*H2100MM||Doors:||Double Leaf Sliding Doors|
|Wind Speed:||22-25m/s||Class:||100 Class|
|Material:||Power Coated Steel For Outside||Color:||White|
clean room air showers,
dust free room
Cargo Clean Air Shower With Wide Automatic Double Leaf Sliding Doors And Three Side Blowing
Doors:Automatic Double Leaf Sliding Doors
Door Size: 1800mm x2100mm
Cargo Cleanroom Air Shower Tunnel for clean room is a kind of partial clean equipment with rather strong universality and is installed at the partition between the clean and non-clean rooms. Its used for the personnel or matters to shower before entering the clean area. After using it, the dust could effectively be reduced to enter the clean area and maintain the normal working status.
Blowing type: single-side blowing, double-side blowing, three-side blowing.
1. Completely self-contained, pre-wired, fully equipped Air Shower Tunnel systems help solve decontamination problems.
2. Modular design lets you order a system to suit your cleanroom.
3. HEPA filter/blower modules (rated 99.97% efficient @ 0.3 micron particles) wash personnel with Class 100 air to dislodge and remove particles.
4. Solid-state microprocessor panel provides programmable control over access door operation.
5. Electromagnetic interlocking doors minimize contamination and automatically release in the event of power failure or when the emergency stop button is pressed.
6. Energy-efficient LED lighting mounted on the ceiling.
7. Available in white powder-coated or stainless steel to meet various cleanroom requirements
8. Variety of sizes and door configurations
9. Economical to operate and easy to maintain
10 An ionizing bar is available as an optional accessory.
|Product type||Cargo Clean Air Shower With Wide Automatic Double Leaf Sliding Doors And Three Side Blowing|
|Material for casing||T=1.2MM Power coated steel for outside, SS304 for inside|
|Material for doors||Stainless steel 304|
|Door type||Sliding doors|
|Blowing way||3-side blowing|
English intelligent control panel with human voice
|HEPA filter efficinecy:||99.99%|
|Photoelectric sensor||OMRON brand|
|Shower time||0-99s adustable|
|Spurt wind speed||25-27m/s above|
|Safeguard||Leakage switch and thermal overload relay (Protect people from electric leakage)|
size and specificaton:
|Product||Cargo Clean Air Shower With Wide Automatic Double Leaf Sliding Doors And Three Side Blowing|
|External dimensions (mm)||W3800*D2600*H2300MM|
|Internal dimensions mm||W1800*D260*H2100MM|
|Doors||2 sets of SS double-leaf sliding doors|
|Suitable||People and Goods|
|Nozzles||16+16+18=54 PCS(3-side blowing)|
|Blower fan||6 sets|
|HEPA filter size||610x610x90mm|
|HEPA filter qty||6 PCS|
|HEPA filter efficiency||H13|
|Photolectric sensor||ORMON 2 PCS|
|Fluorescent Lamp||Philips 3x 20W|
|Air shower time||0-99 s Adjustable|
|Spurt wind speed||22-25m/s|
|Control system||Microcomputer control panel with human invoice prompt, electric interlock, automatical blowing by photoelectric sensor
Air shower Details:
Drawing of Air Shower Tunnel
Testing in factory:
All of equipment will be individually tested for safety and performance in accordance with international Standards before shipment.
Each unit is shipped with a documentation outlining the tests undertaken and the units individual results for each unit.
Testing before shipment:
1. Appearance inspection
2. Electrical safety tests
3. Air wind speed testing
4. Function testing
The warranty of our equipment is for 1 year, but excluding consumable parts and accessories.
All equipment is shipped with a comprehensive use’s manual with testing report.
Additional IO/OQ/GMP document is available upon request.
Contact our sales representative for specific warranty details or document request.
1. HEPA filter: It should be changed in half or one year once.
2. Pre filter: It should be changed in 3-6 month once.
Why you choose ZHISHENG Company ?
Fast reply in 12 hours if we receive any inquiry or request from customer
Familiar with equipment.
Technician or enginner can go to Southeast Asian countries for guiding insallation of machines. Like Thailand, Vietnam, Philipines, Malaysia and so on.
• Production period:15-30days
• Shipping notice or insurance for you after the goods is shipped.
After sales service:
• We respect your feed back after receive the goods.
• We provide 1 year warranty after goods arrive.
• We promise all spare parts available in lifetime use.
• We care of your complain within 48hours.
30% prepayment by T/T at order, the balance of payment before shipment.
Cleanroom equipments,like air shower, FFU. It is one-year warranty.
We have CE and ROHS Certificate for air shower
Contact Person: Miss. Rita Guo