|
| MOQ: | 1 set |
| Standard Packaging: | plywood case |
| Delivery Period: | 10-15 days after receive prepayment |
| Payment Method: | T/T, Western Union |
| Supply Capacity: | 200 Set/Sets per Month |
Clean Air Shower Tunnel With Auto High Fast Speed Shutter Doors By Radar Sensor
Air shower with high speed shutter door.pdf
Doors: Soft PVC Fast Speed Shutter Doors
Door Net Width:W2500mm x H2500MM
Description:
Air Shower Tunnel provide a rapid, effective means to reduce dust contamination from individuals' clothing when entering or leaving a controlled area.
Air Shower Tunnels are protected passageways that allow large numbers of personnel to rapidly transit into controlled areas.
Air Showers and Tunnels supply high volumes of recirculated, dust free, air to lift contaminants from personnel, while they stand, or walk through the specially constructed chamber.
Air flows through pressurized directional nozzles at velocities up to 10,000 feet per minute.
The clean, dust free, high velocity air provides efficient scrubbing action to remove particulates from work clothes and protective equipment.
The contaminants are directed downwards through the grilles and hollow walls of the Air Shower and then is filtered through HEPA filters and recirculated.
Features:
1. The control system run automatically by photoelectric sensor, the two door are electric interlocked.
(One door in open state, the other door must in close state. When people enter air shower, the system will
shower automatically by photoelectric sensor)
2. Air shower time from 1 to 99 seconds which can be adjustable
3. Adopt Pre filter and HEPA filter
4. The door, bottom-board, nozzles are used of stainless steel, good appearance.
5. When air shower is used to pass cargo, it is without bottom-board.
Optional accessory:
1. Manual swing door / automatic sliding door/High speed scroll shutter door
2. HEPA filter or ULPA filter
3. Material for cabinet: cold-rolled steel plate with powder coated / SUS#201 / SUS#304
4. Common fluorescent lamp / UV Sterilizer lamp
5. With voice announce
Parameter:
| Product type | Clean Air Shower Tunnel With Auto High Fast Speed Shutter Doors By Radar Sensor |
| Material for casing | T=1.2MM Steel with Spray painting for outside, stainless steel 304 for inside, no base |
| Material for doors | Soft PVC |
| Nozzles | Stainles steel |
| Door leaf | SIngle |
| Door type | High Speed Shutter Doors |
| Blowing way | 3-side blowing |
| Control system |
English intelligent control panel with human voice and PLC control system |
| Locks | Electric interlocked |
| HEPA filter efficinecy: | 99.99% |
| Pre filter | G3 |
| Light | Philips brand |
| Photoelectric sensor | OMRON brand |
| Shower time | 0-99s adustable |
| Spurt wind speed | 22-25m/s |
| Power supply | 380V/50HZ/3PH |
| Safeguard | Leakage switch and thermal overload relay (Protect people from electric leakage) |
size and specificaton:
| Product | Clean Air Shower Tunnel With Auto High Fast Speed Shutter Doors By Radar Sensor |
| Model | AS-3200D-6.5-SD |
| External dimensions (mm) | W3200*D6500*H2700 |
| Internal dimensions (mm) | W2500*D6500*H2500 |
| Doors | 2 sets of High speed shutter doors |
| Door closer | NONE |
| Lock | electric interlocked |
| Suitable | Both People and Goods |
| Nozzles | 48+48=96PCS(2-side blowing) |
| Blower fan | 24sets |
| Blow power(W) | 9600W |
| Weight(kg) | Appro.1600 |
| HEPA filter size | 1220x610x90mm |
| HEPA filter qty | 12 PCS |
| HEPA filter efficiency | H13 |
| Photolectric sensor | ORMON 2 PCS |
| Fluorescent Lamp | Philips 6x 20W |
| Nozzle diameter | 32mm |
| Air shower time | 0-99 s Adjustable |
| Spurt wind speed | 22-25m/s |
| Power Supply | AC380V/50Hz/3Ph |
| Control system | Microcomputer control panel with human invoice prompt, electric interlock, automatical blowing by photoelectric sensor |
Air shower pictures:
Drawing Of Air Shower Tunnel
Testing in factory:
All of equipment will be individually tested for safety and performance in accordance with international Standards before shipment.
Each unit is shipped with a documentation outlining the tests undertaken and the units individual results for each unit.
Testing before shipment:
1. Appearance inspection
2. Electrical safety tests
3. Air wind speed testing
4. Function testing
Warranty:
The warranty of our equipment is for 1 year, but excluding consumable parts and accessories.
All equipment is shipped with a comprehensive use’s manual with testing report.
Additional IO/OQ/GMP document is available upon request.
Contact our sales representative for specific warranty details or document request.
Replacement parts:
1. HEPA filter: It should be changed in half or one year once.
2. Pre filter: It should be changed in 3-6 month once.
Why you choose ZHISHENG Company ?
Professional service:
Fast reply in 12 hours if we receive any inquiry or request from customer
Familiar with equipment.
Technician or enginner can go to Southeast Asian countries for guiding insallation of machines. Like Thailand, Vietnam, Philipines, Malaysia and so on.
How do you ship your air showers?
ZHISHENG normally ships air showers as pre-assembled systems.
However, you can request to have your order shipped disassembled for easier transport through standard doorways or more space-restrictive access areas.
Delivery time:
• Production period:15-30days
• Shipping notice or insurance for you after the goods is shipped.
After sales service:
• We respect your feed back after receive the goods.
• We provide 1 year warranty after goods arrive.
• We promise all spare parts available in lifetime use.
• We care of your complain within 48hours.
Payment Term:
30% prepayment by T/T at order, the balance of payment before shipment.
Cleanroom equipments,like air shower, FFU. It is one-year warranty.
We have CE and ROHS Certificate for air shower
|
|
| MOQ: | 1 set |
| Standard Packaging: | plywood case |
| Delivery Period: | 10-15 days after receive prepayment |
| Payment Method: | T/T, Western Union |
| Supply Capacity: | 200 Set/Sets per Month |
Clean Air Shower Tunnel With Auto High Fast Speed Shutter Doors By Radar Sensor
Air shower with high speed shutter door.pdf
Doors: Soft PVC Fast Speed Shutter Doors
Door Net Width:W2500mm x H2500MM
Description:
Air Shower Tunnel provide a rapid, effective means to reduce dust contamination from individuals' clothing when entering or leaving a controlled area.
Air Shower Tunnels are protected passageways that allow large numbers of personnel to rapidly transit into controlled areas.
Air Showers and Tunnels supply high volumes of recirculated, dust free, air to lift contaminants from personnel, while they stand, or walk through the specially constructed chamber.
Air flows through pressurized directional nozzles at velocities up to 10,000 feet per minute.
The clean, dust free, high velocity air provides efficient scrubbing action to remove particulates from work clothes and protective equipment.
The contaminants are directed downwards through the grilles and hollow walls of the Air Shower and then is filtered through HEPA filters and recirculated.
Features:
1. The control system run automatically by photoelectric sensor, the two door are electric interlocked.
(One door in open state, the other door must in close state. When people enter air shower, the system will
shower automatically by photoelectric sensor)
2. Air shower time from 1 to 99 seconds which can be adjustable
3. Adopt Pre filter and HEPA filter
4. The door, bottom-board, nozzles are used of stainless steel, good appearance.
5. When air shower is used to pass cargo, it is without bottom-board.
Optional accessory:
1. Manual swing door / automatic sliding door/High speed scroll shutter door
2. HEPA filter or ULPA filter
3. Material for cabinet: cold-rolled steel plate with powder coated / SUS#201 / SUS#304
4. Common fluorescent lamp / UV Sterilizer lamp
5. With voice announce
Parameter:
| Product type | Clean Air Shower Tunnel With Auto High Fast Speed Shutter Doors By Radar Sensor |
| Material for casing | T=1.2MM Steel with Spray painting for outside, stainless steel 304 for inside, no base |
| Material for doors | Soft PVC |
| Nozzles | Stainles steel |
| Door leaf | SIngle |
| Door type | High Speed Shutter Doors |
| Blowing way | 3-side blowing |
| Control system |
English intelligent control panel with human voice and PLC control system |
| Locks | Electric interlocked |
| HEPA filter efficinecy: | 99.99% |
| Pre filter | G3 |
| Light | Philips brand |
| Photoelectric sensor | OMRON brand |
| Shower time | 0-99s adustable |
| Spurt wind speed | 22-25m/s |
| Power supply | 380V/50HZ/3PH |
| Safeguard | Leakage switch and thermal overload relay (Protect people from electric leakage) |
size and specificaton:
| Product | Clean Air Shower Tunnel With Auto High Fast Speed Shutter Doors By Radar Sensor |
| Model | AS-3200D-6.5-SD |
| External dimensions (mm) | W3200*D6500*H2700 |
| Internal dimensions (mm) | W2500*D6500*H2500 |
| Doors | 2 sets of High speed shutter doors |
| Door closer | NONE |
| Lock | electric interlocked |
| Suitable | Both People and Goods |
| Nozzles | 48+48=96PCS(2-side blowing) |
| Blower fan | 24sets |
| Blow power(W) | 9600W |
| Weight(kg) | Appro.1600 |
| HEPA filter size | 1220x610x90mm |
| HEPA filter qty | 12 PCS |
| HEPA filter efficiency | H13 |
| Photolectric sensor | ORMON 2 PCS |
| Fluorescent Lamp | Philips 6x 20W |
| Nozzle diameter | 32mm |
| Air shower time | 0-99 s Adjustable |
| Spurt wind speed | 22-25m/s |
| Power Supply | AC380V/50Hz/3Ph |
| Control system | Microcomputer control panel with human invoice prompt, electric interlock, automatical blowing by photoelectric sensor |
Air shower pictures:
Drawing Of Air Shower Tunnel
Testing in factory:
All of equipment will be individually tested for safety and performance in accordance with international Standards before shipment.
Each unit is shipped with a documentation outlining the tests undertaken and the units individual results for each unit.
Testing before shipment:
1. Appearance inspection
2. Electrical safety tests
3. Air wind speed testing
4. Function testing
Warranty:
The warranty of our equipment is for 1 year, but excluding consumable parts and accessories.
All equipment is shipped with a comprehensive use’s manual with testing report.
Additional IO/OQ/GMP document is available upon request.
Contact our sales representative for specific warranty details or document request.
Replacement parts:
1. HEPA filter: It should be changed in half or one year once.
2. Pre filter: It should be changed in 3-6 month once.
Why you choose ZHISHENG Company ?
Professional service:
Fast reply in 12 hours if we receive any inquiry or request from customer
Familiar with equipment.
Technician or enginner can go to Southeast Asian countries for guiding insallation of machines. Like Thailand, Vietnam, Philipines, Malaysia and so on.
How do you ship your air showers?
ZHISHENG normally ships air showers as pre-assembled systems.
However, you can request to have your order shipped disassembled for easier transport through standard doorways or more space-restrictive access areas.
Delivery time:
• Production period:15-30days
• Shipping notice or insurance for you after the goods is shipped.
After sales service:
• We respect your feed back after receive the goods.
• We provide 1 year warranty after goods arrive.
• We promise all spare parts available in lifetime use.
• We care of your complain within 48hours.
Payment Term:
30% prepayment by T/T at order, the balance of payment before shipment.
Cleanroom equipments,like air shower, FFU. It is one-year warranty.
We have CE and ROHS Certificate for air shower
