W1800mm Cargo Air Shower Tunnel With Fast Speed Shutter Doors for For Forklift, Powder coated steel material

Cargo Air Shower Tunnel With Fast Speed Shutter Doors for Forklift, Powder coated steel material

 

Cleanroom Cargo Air Shower Tunnel With Fast Speed Scrolled Doors For Forklift

 

Doors: Soft PVC Fast Speed Scrolled Doors

 

Door Net Width: 1800mm 

 

Description:

 

Air Shower Tunnel  for clean room is a kind of partial clean equipment with rather strong universality and

 

is installed at the partition between the clean and non-clean rooms. Its used for the personnel or matters

 

to shower before entering the clean area. After using it, the dust could effectively be reduced to enter the

 

clean area and maintain the normal working status.

 

Blowing type: single-side blowing, double-side blowing, three-side blowing.

 

Features:

 

1. The control system run automatically by photoelectric sensor, the two door are electric interlocked.

 

(One door in open state, the other door must in close state. When people enter air shower, the system will

 

shower automatically by photoelectric sensor)

 

2. Air shower time from 1 to 99 seconds which can be adjustable

 

3. Adopt Pre filter and HEPA filter

 

4. The door, bottom-board, nozzles are used of stainless steel, good appearance.

 

5. When air shower is used to pass cargo, it is without bottom-board.

 

Standard Features:

 

1. Large Airflow and Low Noise Blower fan

 

2. Neoprene vibration isolator for blower

 

3. 99.99% 0.3 micron HEPA filter

 

4. Stainless Steel adjustable air nozzles

 

5. MEVR 7 pre-filters located at the botton of the wall for easy access

 

6. Electric door interlock 12DV with 50kg holding force.

 

7. Emergency stop station (Shutts off blower and turns off locks)

 

8. Commercial duty door closers.

 

9. LED light fixture.

 

10. Pre-wire control panel with non-fused disconnect switch, tranfermers, motor starter with short circuit and overload protection and fused and circuit breaker.

 

 

Optional Features:

 

1. 99.999% @ .12 micron ULPA filter

 

2. MERV 8-10 Pre-filters

 

3.Numeric display

 

4. Touchscreen display

 

5. Vertical laminar flow ceiling

 

6. Hazardous location electrical

 

7. Automatic door systems

 

8. Magnehelic gauge for HEPA filter

 

9. Ionization

 

10. Audible alarms

 

11. Safety glass

 

12. Additional emergency stop stations

 

13. Light switch for interior LED light

 

Parameter:

 

Product type	Cleanroom Cargo Air Shower Tunnel With Fast Speed Scrolled Doors For Forklift
Material for casing	T=1.2MM Steel with Spray painting
Material for doors	Soft PVC
Nozzles	Stainles steel
Door leaf	SIngle
Door type	High Speed Shutter Doors
Blowing way	3-side blowing
Control system	English intelligent control panel with human voice and  PLC control system
Locks	Electric interlocked
HEPA filter efficinecy:	99.99%
Pre filter	G3
Light	Philips brand
Photoelectric sensor	OMRON brand
Shower time	0-99s adustable
Spurt wind speed	22-25m/s
Power supply	380V/50HZ/3PH
Safeguard	Leakage switch and thermal overload relay (Protect people from electric leakage)

 

 size and specificaton:

 

Product	Cleanroom Cargo Air Shower Tunnel With Fast Speed Scrolled Doors For Forklift
Model	AS-2300T-2.6-SD
External dimensions (mm)	W2300*D2600*H2300
Internal dimensions WxHxD(mm)	1800*D2600*H2000
Doors	2 sets of High speed shutter doors
Door closer	NONE
Lock	electric  interlocked
Suitable	Both People and Goods
Nozzles	18+18+12=48 PCS(3-side blowing)
Blower fan	4 sets
Blow power(W)	4000W
Weight(kg)	Appro.780
HEPA filter size	610x610x90mm
HEPA filter qty	4 PCS
HEPA filter efficiency	H13
Photolectric sensor	ORMON 2 PCS
Fluorescent Lamp	Philips 2x 20W
Nozzle diameter	32mm
Air shower time	0-99 s Adjustable
Spurt wind speed	22-25m/s
Power Supply	AC380V/50Hz/3Ph
Control system	Microcomputer control panel with human invoice prompt, electric interlock, automatical blowing by photoelectric sensor

 

Air shower Details:

 

 

Drawing Of Air Shower Tunnel

 

 

Testing in factory:

 

All of equipment will be individually tested for safety and performance in accordance with international Standards before shipment.

 

Each unit is shipped with a documentation outlining the tests undertaken and the units individual results for each unit.

 

Testing before shipment:

1. Appearance inspection

2. Electrical safety tests

3. Air wind speed testing

4. Function testing

 

Warranty:

 

The warranty of our equipment is for 1 year, but excluding consumable parts and accessories.

All equipment is shipped with a comprehensive use’s manual with testing report.

Additional IO/OQ/GMP document is available upon request.

Contact our sales representative for specific warranty details or document request.

 

Replacement parts:

1. HEPA filter: It should be changed in half or one year once.

2. Pre filter: It should be changed in 3-6 month once.

 

How can I rate the efficacy of my air shower?

 

You can rate the efficacy of the air shower by measuring the air flow velocity at each nozzle.

 

Each nozzle is designed to provide up to 22-25m/s, If the measured velocities fall significantly short of 22m/s,

 

please check whether the HEPA filters need to be replaced.

 

 

Why you choose ZHISHENG Company ?

 

Professional service:

 

Fast reply in 12 hours if we receive any inquiry or request from customer

Familiar with equipment.

Technician or enginner can go to Southeast Asian countries for guiding insallation of machines. Like Thailand, Vietnam, Philipines, Malaysia and so on.

 

 

Delivery time:

• Production period:15-30days

• Shipping notice or insurance for you after the goods is shipped.

 

After sales service:

 

• We respect your feed back after receive the goods.

• We provide 1 year warranty after goods arrive.

• We promise all spare parts available in lifetime use.

• We care of your complain within 48hours.

 

Payment Term:

30% prepayment by T/T at order, the balance of payment before shipment.

 

Cleanroom equipments,like air shower, FFU. It is one-year warranty.