|Size:||610*610*240||Material:||Powder Coated Steel|
|Powder:||160w||Air Velocity:||0.45m / S ± 20%|
ffu fan filter,
hepa filter fan
Air velocity 0.45m / s ± 20% Fan Filter Unit with HEPA Filter
Fan filter unit, also called for FFU. It's widely used in the cleanroom, to filter the dust and offer the clean air. With the HEPA filter together.
2.low operation cost
4.wind speed uniformity
5.in the largest air volume can reach the highest total net pressure value
6.easy to install on the skeleton of the ceiling in the clean room
The fan filter unit it's widely used in the cleanroom, like: emiconductor, electronics, flat-panel displays, disc-drive, manufacturers and optics, bio-engineering, clean lines, clean bench, clean room ,laminar flow hood ,etc.
Standard Size and Specification
|Size for cabinet(mm)||610x610x240||915x610x240||1170x570x240||1220x610x240|
|Material||Cold Rolled steel with powder coated/Galvalume sheet /SUS#201/SUS# 304|
|Average Air flow(m3/h)||600||900||1080||1200|
|Air velocity(Tested under filter300mm)||0.35-0.6m/s|
|Optional||Control panel, Remote control, Pre filter, Pressure gauge|
Testing in factory:
All of equipment will be individually tested for safety and performance in accordance with international Standards before shipment. Each unit is shipped with a documentation outlining the tests undertaken and the units individual results for each unit.
Testing before shipment:
1. Appearance inspection
2. Electrical safety tests
3. Air velocity speed testing
4. Function testing
The warranty of our equipment is for 1 year, but excluding consumable parts and accessories.
All equipment is shipped with a comprehensive use’s manual with testing report.
Additional IO/OQ/GMP document is available upon request.
Contact our sales representative for specific warranty details or document request.
1. HEPA filter: It should be changed in half or one year once.
2. Pre filter: It should be changed in 3-6 month once.
Why you choose ZHISHENG Company ?
• Fast reply in 12 hours if we receive any inquiry or request from customer
• Familiar with equipment.
• Production period:15-30days
• Shipping notice or insurance for you after the goods is shipped.
After sales service:
• We respect your feed back after receive the goods.
• We provide 1 year warranty after goods arrive.
• We promise all spare parts available in lifetime use.
• We care of your complain within 48hours.
30% prepayment by T/T at order, the balance of payment before shipment.
Contact Person: Lisa Lee